Como, WA 6152 · Southern Suburbs
Roller Door Repairs in Como, WA
The roller door is the standard garage door in Western Australia, and it fails in ways a sectional door never does. The curtain corrugates or creases, the barrel loses tension, the bottom rail corrodes out from the inside, and the guides fill with dust until the curtain drags. We work on roller doors every day across the metro and carry curtain, spring and guide parts on the van.
We cover the whole of Como (6152), 5.7 km from the CBD, taking in the streets around Como Secondary College and Como Beach. Como's built environment is pre-war and inter-war character housing on tight frontages, a great deal of it reached from a rear lane, with garages added long after the house. On those homes, a mix of retrofitted roller doors and old tilt doors in openings with restricted headroom.
Why Como doors need this
At 3 km inland, Como gets a milder version of the coastal problem: enough airborne salt to shorten the life of fixings and springs, without the outright corrosion of the front-line streets. The bigger day-to-day nuisance here is sand and limestone dust packing into the guides and tracks.
Como, WA sits on the Swan below the Canning Bridge with a mix of original post-war homes and substantial apartment and townhouse infill along the river. That gives it two door populations: domestic garages on the older streets, and shared basement shutters under the newer buildings, doing very different amounts of work.
What the job covers
- Curtain straightening and replacement
- Barrel and spring axle re-tensioning
- Bottom rail and weather strip
- Side guides and end caps
- Locking bars and centre locks
- Motor conversion for a manual roller door
Signs you need it
- The curtain is creased or wavy
- The door is heavy to lift by hand
- It drops instead of staying where you leave it
- The bottom rail is rusted or bowed
- It drags and squeals in the guides
Getting to Como
Same day in most cases for Como. There is no depot and no showroom — the vans work corridors across the metro, so the honest answer depends on where one already is when you call. We will give you a real window on the phone rather than a comfortable one, and if we cannot get to you today we will say so.
Also in Como
Roller Doors nearby
Como, WA
Roller Doors — what customers said
“The bottom of our roller door had rusted through from the inside and we had no idea until it started dragging. Explained exactly what salt does out here and replaced the rail rather than talking us into a whole new door.”
“Rear lane access and barely room to swing a tool. Worked around it without complaining once, which I did not expect.”
“Safety edge kept triggering for no reason and we had been told to just bypass it. He fixed it instead, which is the answer I wanted.”
Swipe to see more →
Roller Doors in Como — common questions
How soon can you do roller doors in Como?
It depends which corridor a van is working when you call. Como is 5.7 km from the CBD, so ring rather than use the form — whoever picks up can see where the vans are.
Why do roller doors fail faster near the coast?
Because the attack starts where you cannot see it — inside the profile, on the fasteners, along the cut edge of the curtain running in the guide. Within a couple of kilometres of the ocean, that lower section is reliably the first part of the door to give up.
Can a creased curtain be straightened or does it need replacing?
A single shallow crease can often be worked out. Once the corrugations have folded over on themselves the curtain has lost its strength and will keep jamming in the guides — that one needs replacing, and we will show you which you have rather than telling you over the phone.
Can you put a motor on an existing manual roller door?
Usually yes, provided the door is balanced and the curtain is sound. If the barrel tension is gone, that gets corrected first — motorising an unbalanced door just moves the strain onto the motor and shortens its life.