Mount Richon, WA 6112 · Perth Hills
Garage Door Motor Repairs in Mount Richon, WA
Most motors we are called out to have not failed on their own. They have been asked to drag an unbalanced door for months and finally given up. We test the door's balance first, then the motor, board, capacitor and sensors — because fitting a new motor to a door that killed the last one just resets the clock.
We cover the whole of Mount Richon (6112), 28 km from the CBD, taking in the streets around Armadale Shopping City and Armadale. Mount Richon's built environment is Darling Scarp housing on sloping, often unlevel blocks, set among jarrah and marri with long or steep driveways. On those homes, roller and sectional doors on long driveways, with motors that take the brunt of storm-season power cuts.
Why Mount Richon doors need this
On the scarp, Mount Richon's doors face a completely different set of problems from the coastal plain. Jarrah and marri litter fills the tracks and guides all year, driveways are longer and often steeper, and storm season takes out power far more often up here — which kills control boards through surges rather than wearing motors out. Knowing where the manual release is matters more in Mount Richon than it does almost anywhere in Perth.
Mount Richon is quiet, wooded and steep, sitting above Armadale on the scarp face. Long driveways and mature tree cover mean guides fill with litter faster than anything on the plain, and the gradient means a door here is rarely loaded evenly.
What the job covers
- Motor units and control boards
- Capacitors and limit switches
- Drive belts, chains and carriages
- Remotes, wall buttons and keypads
- Photo-eye safety sensors and alignment
- Battery backup units
Signs you need it
- The motor hums but the door does not move
- It only closes if you hold the wall button down
- It reverses as soon as it touches the ground
- The remote works from one metre away and no further
- It stopped after a storm or a power cut
Getting to Mount Richon
Usually next day, same day if a van is working nearby for Mount Richon. There is no depot and no showroom — the vans work corridors across the metro, so the honest answer depends on where one already is when you call. We will give you a real window on the phone rather than a comfortable one, and if we cannot get to you today we will say so.
Also in Mount Richon
Motors nearby
Mount Richon, WA
Motors — what customers said
“Ours is a wide double opening and the previous motor had been wrong for it from the start. First person to actually explain why it kept failing instead of just fitting another one.”
“After a storm the door would not respond to anything. Turned out to be the board rather than the motor, which he said was common up here. Repaired it instead of replacing the lot.”
“Motor had been struggling for months. He checked the door balance first and found that was the actual problem — said fitting a new motor to it would have killed that one too.”
Swipe to see more →
Motors in Mount Richon — common questions
How soon can you do motors in Mount Richon?
It depends which corridor a van is working when you call. Mount Richon is 27.8 km from the CBD, so ring rather than use the form — whoever picks up can see where the vans are.
Does a new motor need an electrician?
It depends on how it is powered. Plugging a motor into an existing power point is not electrical installation work. Hard-wiring one, or adding a new power point in the garage, is — and that needs a licensed electrical contractor. We will tell you which situation you are in before we quote, not after.
The door reverses every time it reaches the floor. Why?
Usually blocked or misaligned photo-eye sensors — a cobweb, a bike wheel, a shifted bracket. Sometimes it is the close-force limit set too tight, and occasionally it is the door binding on a bent track. It is the most common fault we see and the cheapest to fix.
My remote stopped working after a storm.
Perth's storm season takes out control boards through power surges more often than people expect, particularly in the Hills where outages are frequent. Try a fresh battery and re-pairing first; if the wall button also does nothing, it is the board.